40x20x12 mm, 46x20x14 mm, 54x20x16 mm, 70x28x24 mm
TheTHLD5Heavy duty lowering bollard of stainless steel construction, with large tube diameter for increased friction Designed to be the only lowering bollard you will ever need, the THLD5 is rated to a massive 3000kN WLL.
384.00€ (ex. vat)
This flying capstan is a lightweight friction device used to introduce friction into a rope set up to aid controlled lowering of cut limbs. Measuring 265mm x 230mm x 75mm and made from galvanised steel, the THLD1 is an economical lowering device, with its main advantages being light weight and ease of set up. Normally attached to the base of the base of the tree with a loopie or round sling, the lower-wrap can be used in conjunction with a mechanical advantage pulley system for lifting and lowering.
Heavy duty lowering bollard of galvanised steel construction, with serrated base for extra stability. Designed to be attached to base of a tree, for dismantling and sectioning down stems. (For alternative bollard with rubber tree protectors, please check out our THLD2 bollard.) The THLD3 comes with two heavy duty webbing ratchet straps, and the complete kit comes in a heavy duty PVC carry bag.
350.00€ (ex. vat)
The Treehog THLD 2 is a heavy duty lowering bollard designed to be attached to base of a tree. It comes with two heavy duty webbing ratchet straps for this purpose, and the kit comes in a handy carry bag made of heavy duty PVC material. The THLD 2 is mounted on the base of the tree with the two ratchet straps and the lowering line is then passed around the main tube a number of times, to introduce friction into the system. This enables the groundsman to control the descent of a cut limb and avoid shock loading of the rigging system and tree.
By using the 4 sheaves in different setup you can quickly change the amount of friction related to your job requirements so you have a very wide range of load coverage starting from 10 up to 500 kg.
200.00€ (ex. vat)