RIGGER BECKET PULLEY

84.10   Excl. VAT80.74   Excl. VAT

SKU: DMM3-RE28B-FRE Categories: , ,

In stock

Loading...

Description

Pulley | 40 kN | for ropes Ø from 7 mm up to 14 mm | EN 12278

The Rigger Becket Pulley – a further development of the Hitch Climber – is particularly suitable for friction hitch systems or rigging applications.

It has a very high breaking strength with low weight at the same time. The stronger axle construction with special roller bearing ensures extreme solidity and a higher durability. The plates have also been reinforced and can be locked together using an M5 nut and a bolt.

The Rigger Becket Pulley has an additional becket below for use e.g. in a pulley system.

  • Minimum breaking strength: 40 kN
  • Work load limit: 8 kN
  • Material: Aluminium
  • Ultra-high strength pulley side plates
  • High efficiency roller bearings
  • Hollow axle for reduced weight
  • Increased rope-bearing cross-section for textile attachments to the attachment holes
  • Same sheave as previous Triple Attachment Pulley
  • New axle design to increase robustness of the axle/ nut to side plate interface
  • Optional M5 nut and bolt for locking side plates together and can be installed from either side
  • DMM iD optional
  • Can be used as rig plate with or without sheave

Suitable for ropes with Ø from 7 to 14 mm.

Brand

DMM

Additional information

Weight 0.25 kg